The station is intended to test power transformers with capacity up to 5000 kVA with voltage up to 10 kV.
The station is intended to test power transformers of the I-IV dimensions with voltage up to 10 kV acoording to demands of GOST-3484.1, GOST-22756, GOST-21023, GOST-3484.3.
no picture
The bench is intended to test welding transformers used for manual arch welding with 220 and 380 V and up to 20 kW capacity.
The machine is intended for cutting out segments and stripes made from electrocardboard while producing isolation parts for power transformers.
The machine is intended for cutting out rings and stripes made from electrocardboard while producing isolation parts for power transformers.
The machine is intended for corrugation of electro cardboard used in the process of transformer coil winding (corrugators form the canals for transformer oil circulation).
Extensible winding pattern is intended to wind windings of the transformers with III-IV dimensions on isolation cylinders.
The machine is intended for corrugation of electro-cardboard used for isolation of power transformer windings.
The device is intended for pulling wires while winding transformer windings and clamping them in the period of winding machine stoppage halt.
The machine is intended for milling radial surfaces of the glued rings isolation of transformers.
The machine is intended for making electrocardboard stripes dense before producing power transformer isolation.
The installation is intended for convection drying of large size parts with mechanized loading and automatic control of the drying mode.
Machine is intended for row winding the coils on rigid square and round frames. Machine design permits to wind coils simultaneously on three frames. Machine possesses winding step adjustment mechanism and automatic spindle stops after a definite number of winding loops had been obtained.
The machine is intended to wind coils of transformers made of conductors with circular and rectangular cross sections using cylinders made of cardboard. The machine is equipped with a tail stock.
The installation is intended for absorption drying and cleaning transformer oil from mechanical impurities in oil filled electrical apparatus. The installation can be used for transformer oil regeneration provided synthetic tseolit is replaced by silicogel or other sorbent produced for this purpose.
Scissors are intended for cutting sheet isolation materials used while repairing electric motors.
The machine is intended to wind electric motor and transformer coils having circular and rectangular conductor cross-sections.
no picture
The machine is intended for fabricating electro cardboard parts of rectangular isolation for I-IV dimension transformers.
The bath is intended for tinning of copper wire, tyre and tips of cables of electrotechnical products. It is applied in the time of repair and manufacturing of windings of electric equipment.
The chamber is intended for dyeing large size parts by means of spraying.
Unit for measuring Active Resistance of electric machine windings (КИСО) is intended for measuring winding active resistance and revealing faults in three phase transformers.
no picture
The device is intended for cutting out gaskets out of paronite material and cardboard.
The machine is intended to cover parts made from electrocardboard with varnish.
The installation is intended to solder copper bus by using hard solders in the process of electric machine repair. - 3 position switch to commutate operating current - mechanical clamp of the electrode - fixation of the soldered bus.