Русский
+7 (8635) 22-53-50, 22-53-51, 22-53-71
Equipment for repair electrical motors with the capacity up to 100 kW
Catalog
no picture
Test bench is intended for commissioning trials of welding generators with arch welding by direct current with the capacity of up to 25 kW according to GOST 304-82 standard.
| TECHNICAL DESCRIPTION | |
| Rated supply voltage, Hz | 220V, 50 |
| Supply voltage deviation, % | ± 12 |
| Consumed current, A | 40 |
| Asynchronous frequency regulated drive, rev/min | 0-3000 |
| Measuring input, A | 500, 0-50V |
| Auxiliary outlet, A | 50, 5-50V |
| Number of testing posts, | 6 |
| Average testing time, min | 6 |
| Bench weight, kg | 350 |
| Bench area, m2 | 12,5 |
| Control weight dimensions, mm/kg | 1500x600x400 /350 |
| TECHNICAL DESCRIPTION OF MEASURING DEVICES: DIGITAL MEGOHMMETER E6-22 | |
| Precision rate, | 1,5 |
| Measuring resistance range, Ohm | 1x10(7) |
| Nominal testing voltage, V | 100, 500, 1000 |
| Max. current, mA | not more than 5 |
| DIGITAL MEASURING DEVICES PFP-1 | |
| Precision rate, | 0,15 |
| Measuring speed, meas./sec | 3 |
| Monitoring time, msek | less than 300 |
 Fig 1. Equipment lay out 1. Bench panel 2. Run-in switch 3.End switch 4. Load resistance 5. Generator 6.Dielectric slab |
